Residential Wind Generator 400W Maglev Wind Turbine Home Use

Model NO.: max 400w Rotating Shaft: Horizontal Rated Outpower: 400W Rotor Diameter: 1.21m Cut-in Wind Speed: 2.0(M/S) Wind Turbine Controller: MPPT Charge Controller System Weight: 6.8 Kg Trademark: max Origin: China Number of Blade: Multiple-Blade Stress Way of Blade: Resistance Max Outpower: 450W Start-up Wind Speed: 1.5 ( M/S) Voltage: 12, 24 VDC Kilowatt Hours Per Month: 32 Kwh/Mo at 3.2 M/S Certificate: CE RoHS ISO Specification: 400w HS Code: 85023100 Residential Wind Generator 400W maglev Wind Turbine home use


wind generator characteristics:
1. Low start-up wind speed
Low wind speed series small Wind Turbines generate more than 30% effective power than the same rotor diameter wind turbine annually.
2. High-efficient generator system
Three-phase permanent magnet synchronous Small Wind Generator, more than 10% of the efficiency of ultra-GB, starting resistance, only be 1/3 of the GB limit, motor insulation rating class h insulation.
3. MPPT power management system
Built-in a new intelligent controller, monitoring the wind turbines operation in real-time MPPT(maximum power point tracking) charge.
4. Noise reduction innovative technology
Start and product electricity at the 1.5m/s, noise only at dB at 13m/s/.
5. Perfect wind wheel system


The Wind Turbine Generator wheel are made of a low temperature resistance, aging high strength compound material, can cope with a variety of complex wind conditions, charge wind energy into electrical energy efficiently and sustainably...
6. Unique design of the rudder


Specific requirements about installation and sitting of wind turbine are as follows:
1 the minimum recommended tower height is 8m on open ground or 5m above nearby obstructions (fig. 1), there are no obstacles within 100 meters as far as possible;
2 if install two wind turbines on one area, the distance between them is 8-10 times of rotor diameter. Try to locate the wind turbine in the "cleanest" turbulent free air as possible. Turbulence will reduce the efficiency of the wind turbine and may accelerate wear on rotating components.
3 less natural disaster places are preferred.
Safety must be the primary concern when selecting the mounting location. Even if installing the wind turbine in a less than ideal location, don't attempt to mount the turbine while blades are spinning.
Application range

At present, wind turbine has widely applied in:
1 wind solar street lighting system: City street lights, road lights, landscape lighting;
2 highway monitoring power system;
3 telecommunication;
4 offshore oil platform;
5 isolated island desalination;
6 Wind Solar Hybrid System;
7 wind power system for ship;
8 wind power system for home;
9 wind power systemfor farm.
10 wind solar hybrid system

	Rated Capacity	400 watts at 28 mph (12.5 m/s)
	Max Capacity	450watts
	Rotor Diameter	1.21m
	Weight	6.8 kg
	Shipping Dimensions	770x 410x 200 mm (8.8kg)
	Mount	1.5 in schedule 40 1.9 in (48 mm) OD pipe
	Start-Up Wind Speed	1.5 ( m/s)
	Cut-In Wind Speed	2.0(m. s)
	Voltage	12, 24 VDC
	Turbine Controller	Microprocessor-based smart internal regulator with Maximum Power Point Tracking
	Body	Cast aluminum
	Blades	5 PC Nylon Fiber
	Overspeed Protection	Electronic torque control
	Kilowatt Hours per Month	32KWh/mo at 3.2 m/s
	Survival Wind Speed	35m/s
	Warranty	3 year limited warranty

Contact us if you need more details on Wind Turbine. We are ready to answer your questions on packaging, logistics, certification or any other aspects about Wind Generator、Wind Turbine Generator. If these products fail to match your need, please contact us and we would like to provide relevant information.

Product Categories : Mini Series Wind Turbine > Others Mini Series Wind Turbine